花瓶3D打印模型

铁锹 3D打印店铺

This is my new abstract design of vase.

If you download, please give me a made and share. It will really helps in my progress.

Now there is a time to introduce you 3 ways how to print this beautiful model.

1st - Water tight vase (Polygon Vase - solid.stl)

My most favourite print settings gives you watertitght vase in 10 hours with low material consumption. (No spiral mode). I made three vases with this settings and all of them are watertitght and more strong.
Get these values into the slic3r.

Perimeters - 3 (with 0.4 mm nozzle)     // this paremeter gives you wall thickness and watertightness.
Infill - 0%       // this parameter gives you hollow vase without any ribs inside.
Top Layers - 0 layers      //this parameter gives you open top.

2nd - Spiral vase (Polygon Vase - solid.stl)
Spiral vase is very quick. I made one under 4 hours with 0,15 layer height.

3rd - edited model (Polygon Vase - hollow.stl)
For those who want hollow model due to their slicer software.

Polygon_Vase.zip (63.67 MB, 下载次数: 29)

2018-2-6 09:17 上传

点击文件名下载附件

*