Lynda - Fusion 360 产品设计教程

烟雨

Lynda - Fusion 360 Product Design Lighting
Lynda - Fusion 360 产品设计教程



Sculpting visually pleasing forms in 3D can be a bit of a challenge. In instances where the forms are organic shapes without flat areas, it can be tough to figure out how to get started. In this project-based course, dive into 3D modeling techniques by learning how to build a familiar object—a table lamp—with the Fusion 360 tool from Autodesk. Instructor Carl Frischmuth shows how to create a 3D sculpted form for the outer shape and inner shape, an inner frame structure to support an LED light, and supports to connect the inner frame to the outer shape. He also shows how prepare your inner frame and outer shell for 3D printing.

Once you've mastered the various approaches covered in this course, you'll be prepared to approach other complex 3D design problems where the old solutions don't cut it, and you need to create new, complex forms to get the job done.

Topics include:

Sculpting the form of a model
Creating lug support sketches
Joining frames with a tangent spline
Cleaning up frame rings
Creating the center line sketch
Sketching lines to help divide a model
Creating additional material around slice zones
Creating interfaces at the connecting zones
Adding upper support pins and lower support pins
Separating a model in parts
Creating a support base
Building support parts

链接: https://pan.baidu.com/s/1pLbN3QF 密码: d3iv