麦克风图标UI设计教程(翻译) 下

五十六个民族

Master photoshop’s Vector Capabilities: Create a Detailed Microphone Illustration
大师级ps矢量技术：打造一个极具细节的麦克风
By Andrei Marius, 11th February, 2013, 5 Comments
翻译：Steve Woolf
原文地址：http://psd.fanextra.com/tutorials/master-photoshops-vector-capabilities-create-a-detailed-microphone-illustration/
Step 31
Focus on the bottom side of the vector shape made in the previous step. Pick the Ellipse Tool, create a 195 by 40px vector shape and place it as shown in the first image. Send it to back (Shift + Control + [ ) then open the Layer Style window and enter the properties shown in the following images.
视图移动到前几步中所做的矢量形状的下方。选择椭圆工具，创建一个195乘40PX矢量形状，并将其放在如图1中所示的位置。放到底层（按Shift+ Control +[ ），然后打开图层样式窗口，输入下图中的属性。



Step 32
Pick the Ellipse Tool, create a 195 by 40px vector shape and place it as shown in the first image. Select this new vector shape and switch to the Rectangle Tool. Check the Add button from the top bar and add a 195 by 15px vector shape as shown in the second image. Make sure that this vector shape is still selected, send it to back (Shift + Control + [ ) then open the Layer Style window and enter the properties shown in the following images.
选择椭圆工具，创建一个195乘40PX矢量形状，并将其放在如图1中所示的位置。选择这个新的矢量形状，切换到矩形工具。按顶部栏的合并形状按钮，添加一个图2中的195乘15px的矢量形状。请确保此矢量形状仍处于选中状态，放置到底层（按Shift+ Control + [），然后打开图层样式窗口，输入下图中的属性。



Step 33
Return to "gridline every 1px" and focus on the top side of the vector shape made in the thirtieth step. Pick the Ellipse Tool, create a 25 by 6px vector shape and place it as shown in the following image. Open the Layer Style window for this new vector shape and enter the properties shown in the following images.
返回到“1乘1像素的网格”，视图移动到第三十步所作的矢量形状的上方。选择椭圆工具，创建一个25乘6px矢量形状，并将其放在下图中所示的位置。打开这个新的矢量形状的图层样式窗口，输入下图中的属性。(注：原教程少了一张渐变的属性图，大家可以自己根据前面学习到的渐变方法尝试着调一下，可以参考下面的大圆的渐变方式，不要直接复制哦，是不一样的。）



Step 34
Switch to "gridline every 5px". Pick the Rounded Rectangle Tool, set the radius at 120px, create a 215 by 330px vector shape and place it as shown in the first image. Select this new vector shape, check the Subtract button from the top bar and draw a 205 by 320px vector shape as shown in the second image.
切换到“5乘5像素的网格”。挑圆角矩形工具，设置圆角半径为120px，创建一个215乘330px矢量形状，并将其放在如图1中所示的位置。选择这个新的矢量形状，按顶部栏的减去顶层形状按钮，绘制一个如图二的205乘320px的矢量形状。(注：图中按钮标注错了）

Step 35
Select the vector shape made in the previous step and grab the Rectangle Tool. Check the Subtract button from the top bar and draw a 215 by 125px vector shape as shown in the following image.
选择在上一步制成的矢量形状，并选择矩形工具。按顶部栏的减去顶层形状按钮，绘制出215乘125px矢量形状，如下图所示。

Step 36
Return to "gridline every 1px". Select the vector shape edited in the previous step, pick the Rectangle Tool and focus on the bottom side. Check the Subtract button from the top bar and draw a 23 by 8px vector shape as shown in the following image.
返回到“1乘1像素的网格”。选择在上一步编辑的矢量形状，选择矩形工具，视图移动到下方。按顶部栏的减去顶层形状按钮，绘制出23乘8像素的矢量形状，如下图所示。

Step 37
Select the vector shape edited in the previous step, pick the Ellipse Tool and focus on the bottom side. Check the Add button from the top bar and add two, 5px circles as shown in the following image.
选择在上一步编辑的矢量形状，选择椭圆工具，视图移动到下方。按顶部栏的合并形状按钮，并添加两个5px的圆圈，如下图所示。

Step 38
Select the vector shape edited in the previous step, pick the Ellipse Tool and focus on the top side. Check the Add button from the top bar and add two, 5 by 6px vector shapes as shown in the following image.
选择在上一步编辑的矢量形状，选择椭圆工具，视图移动到上方。按顶部栏的合并形状按钮，并添加两个5乘6px的圆圈，如下图所示。

Step 39
Reselect the vector shape made in the last five step and turn it into a smart object. Open the Layer Style window for this new smart object and enter the properties shown in the following images.
重新选择上五步所作的矢量图形，并把它转换成智能对象。打开这个新的智能对象的图层样式窗口，然后输入下图中的属性。



Step 40


Focus on the bottom side of the smart object made in the previous step. Set the foreground at white, pick the Ellipse Tool, create two, 5px circles and place them as shown in the first image. Open the Layer Style window for the left circles and enter the properties shown in the following image. Open the Layer Style window for the right circle, enter the same properties shown in the following image, but inverse the angle.
视图移动到前几步所作的智能对象的底部。设置前景色为白色，选择椭圆工具，创建两个5px的圆圈，并将其放在如图1中所示的位置。打开左边圆圈的图层样式窗口，然后输入下图中的属性。打开右边圆圈图层样式窗口，然后输入下图中的属性，但是用相反的角度。


Step 41
Focus on the top side of the smart object made in the thirty-ninth step and pick the Ellipse Tool. Create two, 5 by 6px vector shapes and place them as shown in the first image. Open the Layer Style window or these new shapes and enter the properties shown in the following image.

游客，如果您要查看本帖隐藏内容请回复